Tuesday, August 2, 2016
Proposed fuel economy and greenhouse gas emissions standards would increase fuel economy and reduce diesel consumption in medium- and heavy-duty vehicles, the Energy Information Administration (EIA) comments. Unlike light-duty vehicles, which have been subject to fuel economy standards since the 1970s, the first phase of medium- and heavy-duty vehicle standards was recently implemented, starting with model year 2014. The proposed Phase 2 standards, issued jointly by the U.S. Environmental Protection Agency and the National Highway Traffic Safety Administration, would take effect in model year 2021 for most medium- and heavy-duty vehicle classes and increase in stringency through model year 2027. The standards are projected to reduce diesel consumption by 0.5 MMbbl of oil equivalent a day by 2040.
As described in an Issues in Focus analysis as part of EIA’s Annual Energy Outlook 2016, the proposed Phase 2 standards address specific vehicle categories, including combination tractors, heavy-duty pickup trucks and vans,
vocational vehicles and, for the first time, trailers. Vehicles are divided into different classes based on their gross vehicle weight rating (GVWR). Light-duty cars and trucks weighing 8500 pounds or less make up Classes 1 and 2a—Class 2 is divided into 2a and 2b—and are not regulated by the proposed new standards. These light-duty vehicles make up most of the vehicles on the road and accounted for 59% of 2015 transportation energy consumption in the U.S. The Phase 2 standards affect classes 2b through 8, covering medium- and heavy-duty vehicles that accounted for about 20% of U.S. transportation energy consumption in 2015.
Heavy-duty pickups and vans, such as three quarter-and one-ton trucks used on construction sites, include Class 2b and 3 vehicles with a GVWR between 8501 and 14,000 pounds. They would be required to meet a 2.5% annual reduction in allowable emissions from model years 2021 to 2027. Vocational vehicles include a wide range of truck styles, such as delivery, refuse, utility, dump, and cement trucks, as well as school buses, ambulances, and tow trucks. This category includes Class 2b through 8 vehicles with a GVWR of 8501 pounds and above. A 16% reduction in carbon dioxide emissions for diesel-powered vehicles would be required, with lower reductions in emissions for gasoline-powered vehicles and exceptions for certain vehicle types.
Combination tractors—semi trucks that typically pull trailers—are Class 7 and 8 vehicles with a GVWR of 26,001 pounds and above. They would be required to reduce carbon dioxide emissions by up to 24% compared to the model year 2017 baseline. Trailers were not regulated in Phase 1, but they would need to improve aerodynamics and rolling resistance with different stringency depending on the type.
By 2040 the average fuel economy of new medium- and heavy-duty vehicles across all regulated classes would reach 10.6 miles per gallon gasoline equivalent, representing a 33% improvement compared to the reference case. Because vehicles can last for decades, the turnover of the vehicle fleet is relatively slow, although newer vehicles are often driven more intensively than older ones. Consequently, the average fuel economy of the entire fleet increases more gradually. In the reference case, total fleet medium- and heavy-duty vehicle fuel economy only increases slightly as vehicles manufactured under Phase 1 standards become fully adopted. Unlike light-duty fuel economy standards, which mainly affect gasoline consumption, standards for medium- and heavy-duty vehicles will primarily affect diesel fuel consumption.
As described in an Issues in Focus analysis as part of EIA’s Annual Energy Outlook 2016, the proposed Phase 2 standards address specific vehicle categories, including combination tractors, heavy-duty pickup trucks and vans,
vocational vehicles and, for the first time, trailers. Vehicles are divided into different classes based on their gross vehicle weight rating (GVWR). Light-duty cars and trucks weighing 8500 pounds or less make up Classes 1 and 2a—Class 2 is divided into 2a and 2b—and are not regulated by the proposed new standards. These light-duty vehicles make up most of the vehicles on the road and accounted for 59% of 2015 transportation energy consumption in the U.S. The Phase 2 standards affect classes 2b through 8, covering medium- and heavy-duty vehicles that accounted for about 20% of U.S. transportation energy consumption in 2015.
Heavy-duty pickups and vans, such as three quarter-and one-ton trucks used on construction sites, include Class 2b and 3 vehicles with a GVWR between 8501 and 14,000 pounds. They would be required to meet a 2.5% annual reduction in allowable emissions from model years 2021 to 2027. Vocational vehicles include a wide range of truck styles, such as delivery, refuse, utility, dump, and cement trucks, as well as school buses, ambulances, and tow trucks. This category includes Class 2b through 8 vehicles with a GVWR of 8501 pounds and above. A 16% reduction in carbon dioxide emissions for diesel-powered vehicles would be required, with lower reductions in emissions for gasoline-powered vehicles and exceptions for certain vehicle types.
Combination tractors—semi trucks that typically pull trailers—are Class 7 and 8 vehicles with a GVWR of 26,001 pounds and above. They would be required to reduce carbon dioxide emissions by up to 24% compared to the model year 2017 baseline. Trailers were not regulated in Phase 1, but they would need to improve aerodynamics and rolling resistance with different stringency depending on the type.
By 2040 the average fuel economy of new medium- and heavy-duty vehicles across all regulated classes would reach 10.6 miles per gallon gasoline equivalent, representing a 33% improvement compared to the reference case. Because vehicles can last for decades, the turnover of the vehicle fleet is relatively slow, although newer vehicles are often driven more intensively than older ones. Consequently, the average fuel economy of the entire fleet increases more gradually. In the reference case, total fleet medium- and heavy-duty vehicle fuel economy only increases slightly as vehicles manufactured under Phase 1 standards become fully adopted. Unlike light-duty fuel economy standards, which mainly affect gasoline consumption, standards for medium- and heavy-duty vehicles will primarily affect diesel fuel consumption.